S7-1500F Configuration : Demonstrate the ease of setup of ET200MP/ET200SP Failsafe I/O and other Profinet safety devices and programming of a S7-1500 Failsafe PLC.
The purpose of this workshop is to guide you through an example of how to configure a 1500F safety PLC using TIA Portal. The requirements for this lab include the safety demo pictured, PC with TIA Portal V15 or greater, and an Ethernet cable for download.
This workshop is based on a bottle-filling machine and requires programming several safety functions. These safety functions will use ESTOP buttons, a RFID door switch, a mode switch, a HMI acknowledgement of safety mode change, a LED wheel to simulate a conveyor, and a safety relay output to simulate a filling station.
The ESTOP pushbuttons will turn off all safety outputs The ETSOP function will require a manual acknowledgement. When maintenance mode is active, and after HMI acknowledgement, opening the door switch will enable or disable safe limiting speed mode for simulated conveyor. A simulated filling position will turn on the relay output to start filling.
The hardware configuration and PLC software programming will be covered during the workshop. Once the project has been downloaded to the PLC you will insert hardware faults into the safety system and use the front display and the Web Server of the PLC to diagnose them. The safety signature and safety printout will also be reviewed for documentation.